Skip to content
  1. Free shipping on orders over £30

Grettz Hub

Best Laser Level for Tiling in 2026 — A Tiler's Guide

Best Laser Level for Tiling in 2026 — A Tiler's Guide
Six rows up a bathroom wall and the joint lines have drifted off level — that job went wrong at setting out, not at fixing. Here's the honest guide to the best laser level for tiling in 2026, from a £59 cross-line to a full 4D layout tool.

Read more
Groundworker in hi-vis holding a measuring staff beside blue ducting and rubble on an open site, with a Grettz green rotary laser level set up on a tripod in the foreground

Best Laser Level for Groundworks and Civils
How to choose a laser level that stands up to groundworks and civils — the specs that matter outdoors, and which Grettz rotary laser fits your work.

Read more
Groundworker in hi-vis holding a levelling staff beside blue pipework and rubble in an open trench, with a Grettz green rotary laser level set up on a tripod behind

How to Set Falls for Drainage With a Rotary Laser
A practical guide to setting accurate drainage falls with a rotary laser, covering gradient calculations, the dual-grade method and the staff-and-receiver method.

Read more
Builder in hi-vis and hard hat checking a reading on a levelling staff against a stone wall, with a Grettz green rotary laser level set up on a tripod in the foreground

Laser Level Accuracy Explained: What ±mm/m Really Means
What laser level accuracy figures like ±2mm at 10m actually mean on site, how error grows with distance, and how to make sure your laser is still hitting spec.

Read more
Grettz green rotary laser level on an aluminium tripod with an LR receiver and red-graduated levelling staff clamped alongside, ready for levelling a floor

How to Level a Concrete Floor With a Laser Level
A practical step-by-step guide to checking levels, setting a datum and pouring or screeding a concrete floor flat using a rotary laser level.

Read more
Grettz 4m telescopic levelling staff fully extended, showing white face with black and red E-pattern metric graduations

How to Read a Levelling Staff: A Beginner's Guide
The E-pattern on a levelling staff looks confusing at first but is simple once it clicks. Here's how to read metres, centimetres and millimetres at a glance.

Read more
Complete Grettz G80 green beam dual-slope rotary laser kit laid out — tripod, green hard case, laser unit, LR receiver, remote control, battery packs, levelling staff, target plate and charger

What Is a Dual-Grade Rotary Laser? Slope and Fall Explained
Dual-grade rotary lasers project a set gradient, not just a flat plane — essential for drainage falls, ramps and driveways. Here's how they work.

Read more
Grettz green rotary laser level in its open green moulded carry case on the ground outdoors, with accessories bag alongside

How to Set a Datum Point on Site With a Laser Level
A datum is the single reference height every level on site is measured from. Here's how to establish one properly with a rotary laser and staff.

Read more
Tradesperson kneeling to set up a Grettz green laser level on a tripod in front of a timber fence and blockwork under a blue sky

Best Laser Level for Bricklaying and Blockwork
Stringline still rules the bed joint, but a laser transforms how you set out and check courses. Here's how bricklayers use lasers — and which to pick.

Read more
Grettz G4D green beam multi-line laser mounted on a wall bracket projecting bright green horizontal and vertical laser lines across an interior first-fix room with timber

Red Beam vs Green Beam Lasers: Which Should You Choose?
Green beams look brighter, red beams run longer and cost less. Here's how to choose the right laser colour for your trade and working conditions.

Read more
Grettz green rotary laser level set up on a tripod on grass at dusk, sun setting through bare trees behind on an outdoor site

How to Use a Rotary Laser Level: A Step-by-Step Guide for Site
A practical, step-by-step guide to setting up and using a rotary laser level on site — from levelling the tripod to reading grade with a receiver.

Read more
Tradesperson in a white hard hat and hi-vis vest setting up a Grettz green rotary laser level on a tripod against dark cladding, with a levelling staff mounted alongside

How to Set Out a Foundation With a Rotary Laser
Setting out a foundation with a rotary laser is the most important hour of any build. This is the practical, no-waffle UK trade guide — from tripod placement to FFL datums, corner readings, dig levels and common mistakes to avoid.

Read more