Skip to content

Grettz Hub

How to Mount a Laser Level Indoors (2026 Guide)

Mounting a laser level indoors comes down to three things: a stable base, a true reference point, and a check that ca...

How to Set Out a Driveway With a Laser Level (2026)

Setting out a driveway with a laser level gets the falls, kerb lines and sub-base depths right before a single barrow...

Best Rotary Laser Level for Roofing (2026) — Buy Guide

Roofers need a laser that self-levels on an unstable platform, throws a visible beam in daylight, and survives being ...

How to Set Up a Self Levelling Laser (2026 Guide)

A self levelling laser locks itself dead-level once the tripod base sits inside its working range — get that base rig...

How to Use a Surveyors Tape Measure (2026 UK Guide)

Pulling a tape measure sounds simple until the numbers on site don't match the numbers on the drawing — and on a grou...

How to Use a Digital Spirit Level (2026 UK Guide)

A digital spirit level reads angle to a decimal point and beeps when you're dead level or plumb, cutting the guesswor...

How to Use a Cross Line Laser Level (2026 Guide)

A cross line laser level projects a level horizontal line and a plumb vertical line at the same time, so you square u...

Best Surveyors Tape Measure 2026: Site Survey Picks

Picking the best surveyors tape measure for site surveying in 2026 comes down to three things: blade material, length...

Best Stringline for Bricklaying 2026: Ranked & Reviewed

Every stretch of brickwork more than a few courses high lives or dies on one thing: a stringline that stays dead stra...

Best Green Laser Level Outdoor 2026: G80 Wins

Green beam laser levels cost more than red across Grettz's range, but on a bright UK site in 2026 that premium is wha...

Best Laser Level for Kitchen Fitting 2026: Grettz G4D Wins

Kitchen fitting rewards square carcasses, level worktops and cabinet runs that read true from across the room — the b...

Best Self Levelling Laser for Beginners 2026

Choosing a self levelling laser as a first-time buyer means weighing price against how much the laser does for you on...
Back to top