Skip to content
  1. Free shipping on orders over £30

Guides

Grettz 4m telescopic levelling staff fully extended, showing white face with black and red E-pattern metric graduations

How to Read a Levelling Staff: A Beginner's Guide
The E-pattern on a levelling staff looks confusing at first but is simple once it clicks. Here's how to read metres, centimetres and millimetres at a glance.

Read more
Complete Grettz G80 green beam dual-slope rotary laser kit laid out — tripod, green hard case, laser unit, LR receiver, remote control, battery packs, levelling staff, target plate and charger

Dual Slope Rotary Laser: Grade, Fall and X/Y Explained
Dual-grade rotary lasers project a set gradient, not just a flat plane — essential for drainage falls, ramps and driveways. Here's how they work.

Read more
Grettz green rotary laser level in its open green moulded carry case on the ground outdoors, with accessories bag alongside

How to Set a Datum Point on Site With a Laser Level
A datum is the single reference height every level on site is measured from. Here's how to establish one properly with a rotary laser and staff.

Read more
Tradesperson kneeling to set up a Grettz green laser level on a tripod in front of a timber fence and blockwork under a blue sky

Best Laser Level for Bricklaying and Blockwork
Stringline still rules the bed joint, but a laser transforms how you set out and check courses. Here's how bricklayers use lasers — and which to pick.

Read more
Grettz G4D green beam multi-line laser mounted on a wall bracket projecting bright green horizontal and vertical laser lines across an interior first-fix room with timber

Red vs Green Beam Lasers: What Actually Changes?
Green can appear easier to see, but colour alone does not decide which laser is right for the job.

Read more
Grettz green rotary laser level set up on a tripod on grass at dusk, sun setting through bare trees behind on an outdoor site

How to Use a Rotary Laser Level: A Step-by-Step Guide for Site
A practical, step-by-step guide to setting up and using a rotary laser level on site — from levelling the tripod to reading grade with a receiver.

Read more